Can I use an air impact to remove an axle nut?
Short answer: Often yes, with the right impact size and socket, but follow service information, because some axle nuts are staked or one-time use, and use a torque wrench for installation.
Axle nuts are often tightened to high torque, and a 1/2-inch or larger impact with a six-point impact socket is a common way to remove them. Before you start, check how the nut is retained. Many are staked into a slot in the axle, and some use a cotter pin, a nut lock or a retaining cap that must be removed first. Trying to spin a staked nut off can damage axle threads.
Installation is where caution matters most. Many vehicle makers specify a new axle nut, a precise torque and sometimes an additional angle, and some caution against using an impact wrench to install the nut because hammering can damage hub bearings. Follow service information for the vehicle.
Use a calibrated torque wrench for final torque, and stake or lock the new nut as directed. Have a helper hold the brakes or use a holding tool if the hub turns. Support the vehicle on rated stands and wear eye protection.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.