How do I calculate air demand for my whole shop?
Short answer: List every air tool, its CFM at 90 PSI and how much of the time it runs, multiply to get each tool's real demand, total what runs at once, and add margin for leaks and growth.
A simple air audit gives you a defensible number. For each tool, record the maker's CFM at 90 PSI. Estimate a use factor: how much of an hour the tool actually runs. An impact used in short bursts might run a small fraction of the time, while a DA sander in a body shop might run much more.
Multiply CFM by the use factor for each tool, then add up the tools likely to run at the same time. Add allowances for leaks, blow guns, tire inflation and any machines with air-operated functions, such as tire changers and lifts with air locks. Then add a growth margin.
Compare the total against compressor delivered CFM at 90 PSI. If you already own a compressor, you can measure how often it runs to check your estimate. A compressor dealer can perform a formal audit with flow meters. Fix leaks first, since they consume air constantly, and make sure each drop has a rated regulator.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.