How do I choose the right cut-off wheel for an air cut-off tool?
Short answer: Match the wheel diameter and arbor hole to the tool, make sure its maximum RPM meets or exceeds the tool's free speed, and pick thickness and abrasive for the material: thin wheels cut fast and clean, thicker wheels last longer and resist breakage.
Air cut-off tools commonly use 3-inch or 4-inch wheels, mounted on a 3/8-inch arbor or similar. The wheel must fit the tool's guard and arbor exactly; never force a larger wheel onto a tool designed for a smaller one, since the guard will not cover it and the speed rating may not match.
Thin wheels, such as 1/32 inch, cut quickly with less heat and a narrow kerf, which is ideal for sheet metal and exhaust. Thicker wheels, such as 1/16 inch or 1/8 inch, last longer and tolerate more side load, but they cut slower and create more heat. Reinforced wheels have fiberglass mesh for strength. Abrasive types vary by maker; aluminum oxide is common for steel, and some wheels are designed for stainless or aluminum.
Check every wheel's maximum RPM against the tool's free speed. Inspect for cracks, keep the guard installed and never side-grind with a cut-off wheel. Wear eye protection with a face shield, gloves and hearing protection.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.