How do I prevent a cut-off wheel from shattering?
Short answer: Use a wheel rated for the tool's speed, keep the guard in place, avoid side pressure or twisting in the cut, support the work so the kerf does not pinch, and replace wheels that are chipped or dropped.
Cut-off wheels are thin, brittle abrasives spinning at high speed. They shatter when overspeed, bent, pinched or used to grind sideways. A wheel fragment can cause serious eye, face and hand injuries.
Inspect each wheel before mounting. Discard wheels that are cracked, chipped, damp or have been dropped. Confirm the maximum RPM on the wheel exceeds the tool's free speed. Mount it with the correct flanges and tighten the arbor nut properly.
During cutting, keep the wheel straight in the kerf. Do not twist, wedge or side-load it, and support the work so the cut opens rather than closes. Let the tool reach full speed before contacting the work. Keep the guard positioned between the wheel and your body, stand out of the wheel's plane when starting, and wear a face shield over safety glasses, gloves and hearing protection.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.