Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Air Tool How-To Guides / How do I remove rusted leaf spring bolts with air tools?

How do I remove rusted leaf spring bolts with air tools?

Short answer: Soak the bolts in penetrating oil, try an impact wrench at moderate power, and if the bolt is seized in the bushing sleeve, cut it out with a cut-off tool or reciprocating air saw on each side of the hanger, then drive out the remains with an air hammer.

Leaf spring eye bolts often rust solid to the inner sleeve of the bushing. Once that happens, the nut may come off but the bolt will not slide out, and hammering on it only mushrooms the end.

Start by soaking with penetrating oil and letting it work. Support the axle and frame on rated stands so the spring is unloaded, then try the impact. If the bolt spins in the sleeve without coming out, cutting is usually faster than fighting it.

Cut the bolt between the spring eye and the hanger on both sides with a cut-off wheel or air saw, remove the spring, then press or drive the remaining piece out with an air hammer and a blunt punch. Replace bolts, bushings and nuts with new hardware.

Sparks from cutting can ignite fuel, brake fluid and undercoating, so shield fuel lines and the tank and keep an extinguisher nearby. Wear eye protection, a face shield, gloves and hearing protection, and never work under a vehicle supported only by a jack.

Last reviewed 2026-11-20 · Air Tool How-To Guides

Tools used for this job

AIRCAT 6520 3" Reversible Air Cut-Off ToolAstro Pneumatic 401K 0.401" Shank THOR Long Barrel Air Hammer/Riveter

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.