How loud is an air impact wrench and do I need hearing protection?
Short answer: Air impacts are loud enough that hearing protection is recommended; many makers publish sound levels above typical workplace exposure thresholds.
Air impact wrenches are among the loudest tools in a shop. Noise comes from the exhaust air and from the hammer striking the anvil. Many makers publish sound pressure and sound power levels in the tool manual or spec sheet, and those figures are commonly above 85 dBA, the level at which many workplace hearing conservation rules begin to apply.
Quiet impacts lower exhaust noise with mufflers and redirected exhaust, which helps, but hammering still produces sharp impact noise that varies with the fastener and socket. In an enclosed bay with several tools running, noise from neighbors adds up too.
Noise-induced hearing loss is permanent and builds up over years, so protect your hearing every time you run impacts for any length of time. Foam earplugs or earmuffs rated for the noise level are inexpensive and effective. Encourage others nearby to wear them as well, and remember eye protection, since impacts can throw rust and debris.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.