Should I use 6-point or 12-point sockets on an air impact?
Short answer: Six-point impact sockets are preferred because they grip the flats of the fastener and reduce rounding, while 12-point sockets are used mainly for 12-point fasteners.
Six-point impact sockets are the standard choice for hex fasteners. They contact the flat sides of the nut or bolt head, spreading the load over a large area and reducing the chance of rounding the corners. Six-point designs also leave room for thicker socket walls, which helps the socket survive repeated hammer blows.
Twelve-point impact sockets exist mainly for fasteners that are themselves 12-point, which appear on some axle nuts, driveshaft bolts, cylinder head bolts and aerospace-style hardware. Using a 12-point socket on a rusty or tight hex fastener concentrates force near the corners and increases the risk of rounding, which turns a quick job into an extraction.
For most automotive impact work, buy six-point impact sockets in the sizes you use most, and add 12-point sockets only for the fasteners that need them. Inspect sockets for cracks, worn openings and rounded drive squares, and replace damaged ones. Wear eye protection when running impacts.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.