Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0030 mean?

Short answer: P0030 means a problem in the heater control circuit for the upstream oxygen sensor on bank 1; check the heater fuse, the sensor heater resistance and the wiring.

P0030 is a generic code for oxygen sensor heater control circuit, bank 1 sensor 1. Oxygen sensors have heaters so they reach operating temperature quickly. The engine computer monitors the heater circuit.

Check the fuse that feeds the oxygen sensor heaters. Inspect the sensor connector and wiring near the exhaust, where heat and road debris can damage it. Measure the heater resistance at the sensor and compare it with service information.

If the heater has power and the resistance is correct, check the ground control from the engine computer. Use the correct oxygen sensor socket to replace the sensor. Let the exhaust cool before working, since it can burn skin.

Last reviewed 2026-11-16 · Ignition, Oxygen Sensor and Emissions Codes

Tools used for this job

OTC 4673 7 Piece Oxygen Sensor Socket SetElectronic Specialties TMX-589 True RMS Digital Multimeter CATII 1000 Volt

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.