What is an air angle grinder used for?
Short answer: An air angle grinder spins grinding discs, flap discs, cut-off wheels and wire brushes at a right angle to the motor for weld grinding, rust removal, deburring and surface prep, and it is lighter for its power than many electric grinders.
Air angle grinders are common in fabrication, body and frame shops. Typical sizes are 4 to 5 inches, with larger 7-inch models for heavy work. Because they have no electric motor, they run cool, can stall without burning out and are often lighter than electric models of similar output.
The trade-off is air consumption. Angle grinders are among the most air-hungry handheld tools, so they need a compressor with plenty of delivered CFM and a hose and couplers that will not starve them.
Use discs and wheels rated above the grinder's free speed, with the right arbor size, and keep the guard in place and positioned between you and the wheel.
Wear eye protection, a face shield, hearing protection and gloves. Keep sparks away from fuel, paint and flammable materials, and stand out of line with the wheel when starting.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.