Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Air Impact Wrenches / What is an impact wrench's free speed?

What is an impact wrench's free speed?

Short answer: Free speed is how fast the anvil spins with no load, in RPM; higher free speed runs fasteners on and off quickly, but it is not a measure of torque.

Free speed is the anvil's rotational speed with no load, measured in revolutions per minute. It tells you how fast the tool runs a nut along a long thread before it starts hammering, such as spinning off a loosened lug nut or running down a long bolt.

Free speed is not a measure of power. A tool can spin very fast yet deliver modest torque, or spin slower and hit very hard. Makers sometimes also list blows per minute, which is how often the hammer strikes once the tool is impacting. Torque, blows per minute and free speed together give a better picture than any single number.

For general repair work, moderate free speed with good control is usually more useful than maximum speed, especially with feathering triggers. Higher speeds increase the risk of cross-threading when starting fasteners, so always start nuts by hand. Keep loose clothing and gloves away from the spinning socket and wear eye protection.

Last reviewed 2026-11-20 · Air Impact Wrenches

Tools used for this job

AIRCAT 1355XL NitroCat 3/8" Impact wrench

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.