Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Sizing a Compressor to Your Tools / What is the difference between SCFM and CFM?

What is the difference between SCFM and CFM?

Short answer: SCFM is CFM corrected to standard conditions of temperature, pressure and humidity, so it lets you compare compressors and tools fairly; plain CFM may be measured under any conditions.

Air expands and contracts with temperature and altitude, so a cubic foot of air is not always the same amount of air. SCFM, standard cubic feet per minute, adjusts the measurement to a defined reference condition. Different standards exist, so two makers may use slightly different reference points, but SCFM is still a fairer comparison than an unqualified CFM number.

Tool makers usually list air consumption in SCFM at 90 PSI. Compressor makers may list SCFM, ACFM (actual conditions) or displacement CFM. Displacement is the pump's swept volume and is always the largest and least useful number.

For practical shop sizing, compare the compressor's delivered SCFM at 90 PSI against the tool's SCFM at 90 PSI and add a margin. At high altitude, a compressor delivers less usable air than its sea-level rating suggests, so leave extra headroom. If a spec sheet does not say which CFM it is quoting, ask the maker before you buy.

Last reviewed 2026-11-20 · Sizing a Compressor to Your Tools

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.