What PPE should I wear when using air tools?
Short answer: At minimum wear impact-rated safety glasses, and add hearing protection, a face shield for grinding and cutting, a respirator for dust or paint, and the right gloves for the task, avoiding loose gloves around spinning accessories.
Air tools combine high speed, flying debris and noise, so eye protection is the starting point. Look for safety glasses marked to ANSI Z87.1 or the standard used in your country. For grinding, cut-off wheels, wire wheels and air hammers, add a full face shield over the glasses, since fragments can strike the face from any angle.
Many air tools, including impact wrenches, hammers and cut-off tools, are loud enough that hearing protection is recommended, especially for repeated use. Earplugs or earmuffs with an appropriate noise reduction rating help. Sanding and grinding create dust, and some coatings contain lead or other hazards, so use a suitable respirator. Paint work needs respirators rated for the products used.
Gloves protect against cuts, heat and vibration, but loose gloves can catch on rotating drills, wire wheels and burrs. Choose snug, task-appropriate gloves or none at all around rotating parts, depending on the tool maker's guidance. Remove jewelry, tie back long hair and wear sturdy footwear in case a heavy tool is dropped.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.