What puller do I need for wheel hubs and bearings?
Short answer: Hub and bearing pullers depend on the vehicle's hub design; kits with interchangeable plates and adapters cover many vehicles, while pressed bearings may need a press or bearing service kit.
Seized hubs are common on vehicles exposed to road salt. Hub pullers bolt to the wheel studs or hub flange and push against the axle or knuckle to free the hub. Kits with various plates and adapters cover different bolt patterns and designs.
Some bearings are bolt-in units, while others are pressed into the knuckle and need a press or a bearing service kit with the right adapters. Check service information for the design.
Avoid hammering on hubs or bearings, which can damage them. Wear safety glasses and gloves. Support the vehicle safely on a lift or rated jack stands, and keep hands clear of pullers under load, since parts can release suddenly.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.