Why do I need a compressor bigger than my tool's average CFM?
Short answer: Average CFM assumes the tool runs only part of the time, so continuous use, multiple users, leaks and hose losses all demand more air than the average rating suggests.
Tool makers often publish an average air consumption based on an assumed duty cycle, such as the tool running about a quarter of the time. That works for intermittent tools like impacts and ratchets, but it understates the need for tools that run for long stretches.
Several things push real demand higher. Two technicians may pull air at once. Leaks in hoses, couplers and fittings waste air around the clock. Small couplers and long hoses create pressure drop, so the compressor runs longer to hold pressure. Pumps also lose some output as they wear.
A common practice is to add up the tools likely to run at the same time and add a safety margin, often in the range of 25 to 50 percent, then choose a compressor that delivers that at 90 PSI. Fix leaks before buying a larger machine, because a leaking system can waste a meaningful share of compressor output. Use a rated pressure regulator at each drop so tools see the right pressure.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.