Why does my air compressor motor hum but not start?
Short answer: A humming motor that will not turn usually points to a failed start capacitor, the pump starting against tank pressure because the unloader failed, low voltage from a long or undersized cord, or a seized pump; shut it off quickly to avoid burning the motor.
A single-phase compressor motor needs extra starting help, usually from a start capacitor and a centrifugal switch. If the capacitor fails, the motor hums and may trip its thermal overload. Capacitors sometimes bulge or leak when they fail, but testing them requires care because they store a charge.
The second common cause is a failed unloader. When the compressor stops, the unloader should vent the line between the pump and the tank check valve. If it does not, the pump tries to start against full tank pressure and stalls. You may notice the compressor starts fine with an empty tank but hums when restarting at pressure. A leaking check valve can cause the same symptom.
Low voltage is also common: long extension cords, undersized wiring or a weak circuit reduce starting torque. Finally, a pump that is low on oil can seize. Unplug the compressor and release tank pressure before inspecting anything. Capacitor and electrical work should be done by someone qualified, since stored charge and line voltage can cause shock.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.