Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Air Impact Wrenches / Why does my impact wrench spin but not hammer?

Why does my impact wrench spin but not hammer?

Short answer: If the motor spins freely without hammering, the hammer mechanism may be worn, broken or under-lubricated, or the load is too light to engage it.

An impact wrench only starts hammering when the socket meets resistance. With no load, the hammer rides along with the anvil and the tool just spins, which is normal. The problem is when the tool spins freely against a tight fastener and never begins to impact, or hammers weakly and inconsistently.

Common causes are worn or broken hammer parts, such as dogs, pins, cam balls or springs, depending on the mechanism, and grease that has dried out or been packed in too heavily. A cracked hammer case or a loose hammer case bolt can also affect engagement. Low air pressure can make hammering weak, so rule out supply problems with a gauge at the tool first.

If the supply is good, the hammer mechanism needs inspection. Use the maker's exploded diagram and parts, or send the tool to a service center. Disconnect air before opening the hammer case, note how parts are oriented and wear eye protection.

Last reviewed 2026-11-20 · Air Impact Wrenches

Tools used for this job

Ingersoll Rand 231B-AHFK Mechanism KitIngersoll Rand 2850MAX-TK1 Tune Up Kit for 2850

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.