Why doesn't the door unlock when I touch the handle on a car with passive entry?
Short answer: Check the key fob battery and whether other doors respond, then scan the keyless entry module for codes and test the handle sensor and antenna circuits.
Passive entry systems use sensors in the door handles and antennas to detect the key nearby. When one door does not respond, the problem is often local to that door.
Start with the fob battery and try another fob if one is available. Check whether the other doors respond. If only one door fails, the handle sensor, antenna or wiring in that door is the likely cause. Door hinge wiring is a common failure point.
Scan the keyless entry or body module for codes, and use data to see whether the handle touch is detected. Follow service information for testing. Be careful removing door trim, and don't disconnect airbag or side impact sensors without following safety procedures.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.