Why must die grinder accessories be rated for the tool's RPM?
Short answer: Every burr, wheel, stone and disc has a maximum safe speed; running it on a faster grinder can make it shatter or fly apart, so its rating must meet or exceed the grinder's free speed.
Air die grinders often spin very fast, sometimes in the tens of thousands of RPM. Abrasive stones, flap wheels and discs are held together by bonding materials that can fail under excessive centrifugal force. Carbide burrs and mandrels can also break if overspeed or overhung too far.
Accessory makers mark a maximum operating speed on the package or the product. Compare it with the grinder's rated free speed, which is listed on the tool or in the manual. The accessory rating must be equal to or higher than the tool's free speed, not its speed under load.
Also follow the accessory maker's limits on shank overhang, since extending a mounted point too far from the collet lowers its safe speed. Inspect accessories for cracks before use, run new wheels briefly at speed with the tool pointed away from people and wear eye protection, a face shield for heavy grinding, gloves and hearing protection.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.