Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Shop Air Line Plumbing / Why should I never use PVC pipe for compressed air?

Why should I never use PVC pipe for compressed air?

Short answer: PVC is not designed for compressed air and can fail suddenly, breaking into sharp fragments that fly with great force; OSHA and many pipe makers warn against using it for air.

Compressed air stores energy. When a water pipe fails, the water just leaks. When a compressed air pipe fails, the stored air expands instantly and can blow the pipe apart. Rigid PVC is brittle, especially when cold or aged, and it can be weakened by compressor oil and heat. Failures can send shards of plastic across a shop.

OSHA has issued guidance warning against using PVC for above-ground compressed air lines unless the specific product is designed and rated for that use. Many PVC pipe makers also state that their pipe is not for compressed gas service.

If you have PVC air lines, plan to replace them with aluminum modular piping, steel, copper or another product made for compressed air. Until then, keep lines protected from impacts and heat and reduce pressure where possible. Never take the risk in high traffic areas where someone could be hurt.

Last reviewed 2026-11-20 · Shop Air Line Plumbing

Tools used for this job

Milton 2360KIT 3/8" OD Push-to-Connect Shop Air Line Kit

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.