Air Tool Storage and Shop Organization
Racks, carts, drops and labeling that keep air tools and hoses organized and safe.
How should I organize air tools at each work bay?
Give each bay an air drop with a shutoff, filter-regulator and reel, mount holders for the most-used tools within reach, and store specialty tools on a shared rack or cart so hoses stay off the floor and tools are not dropped.
Read the full answer →What should go on an air tool cart?
Short answer: A well-stocked air tool cart holds the tools a technician grabs most, plus impact sockets, extensions, oil, spare plugs and couplers and a short hose whip, so the cart can roll to any vehicle and plug into the nearest drop.
Carts keep tools organized and off the floor. Drawers or bins for accessories keep bits and sockets with the tools that use them.
Keep a small bottle of air tool oil and a few spare plugs on the cart.
Avoid overloading the cart so it does not tip.
Disconnect tools when storing them, and wear eye protection when connecting tools at the vehicle. Some technicians add a magnetic tray for small fasteners and a compact inflator gauge for checking tires at the end of a job. Wipe tools clean before returning them to the cart so grime does not build up in drawers. Check the cart weekly for missing tools and worn plugs.
Tools used for this job
How should I store air tool accessories like sockets, bits and burrs?
Short answer: Store air tool accessories in labeled organizers by type and size, such as socket rails, bit holders and divided burr cases, keeping impact-rated pieces separate from chrome hand tools and protecting cutting edges so carbide burrs and bits stay sharp.
Impact sockets mixed with chrome sockets lead to the wrong socket on the impact, which can crack chrome tools. Many shops use black rails or trays for impact sockets and keep them on the tool cart.
Carbide burrs chip if they knock against each other. Keep them in a stand or case with individual holes. Drill bits stay sharper in indexed cases.
Abrasive discs and wheels should be stored flat and dry in their packaging so they do not absorb moisture or crack.
Label drawers and return accessories after each job, and inspect sockets, bits and burrs for cracks or damage before use, wearing eye protection when using them.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.