Compressed Air Quality and Standards
Air purity classes, breathing air, oil and water content and how shops test their air.
What is ISO 8573-1 air quality class?
ISO 8573-1 is an international standard that classifies compressed air purity by particles, water and oil, using a three-number class code so equipment makers and users can specify how clean the air must be.
Read the full answer →What is Grade D breathing air?
Short answer: Grade D is a breathing air quality specification commonly referenced in the United States for supplied-air respirators, setting limits on oxygen content, oil, carbon monoxide, carbon dioxide and odor.
Supplied-air respirators used for painting must receive air that meets breathing air requirements. Ordinary shop air from an oil-lubricated compressor can contain carbon monoxide, oil mist and other contaminants.
Breathing air systems typically include special filtration, carbon monoxide monitoring or removal and dedicated, clearly labeled fittings that cannot connect to tool air.
Requirements and testing are set by workplace safety regulations and respirator makers, so consult them and the respirator's instructions.
Never connect a respirator to a shop air line unless it is part of a verified breathing air system. Protect workers by following the respirator program required at your workplace.
How can I test my shop air for oil and water?
Short answer: Simple checks include blowing air through a clean white cloth or mirror to look for oil and moisture, while precise testing uses dew point meters, oil indicator tubes or lab sampling.
A quick shop test is to hold a clean white cloth or a cold mirror in front of a blow gun at a drop and watch for wet spots or an oily film. Repeat at different drops, especially the farthest from the compressor.
Dew point meters measure moisture in dried air, which is useful for checking dryer performance. Detector tubes and sampling kits measure oil content more accurately.
Shops that paint often test periodically to catch filter or dryer problems before they cause paint defects.
When testing, keep air pressure low, point air away from people and wear eye protection.
Tools used for this job
Why does air quality matter for plasma cutters?
Short answer: Plasma cutters are sensitive to oil and water in compressed air, which shorten consumable life and cause poor cuts, so makers usually recommend clean, dry, oil-free air with dedicated filtration.
Moisture in the plasma arc causes erratic arcs, rough cuts and rapid electrode and nozzle wear. Oil contamination has similar effects.
Many plasma makers recommend a filter at the machine and a dryer upstream. Some machines have built-in filters, but these may not be sufficient alone.
Drain water from the tank and filters regularly, and replace filter elements as needed.
Follow the plasma maker's air requirements. Wear proper welding protection, including eye and face protection, and keep flammables away from the work area.
Tools used for this job
What are the three main contaminants in compressed air?
Short answer: The three main contaminants are solid particles such as dust and rust, water in vapor or liquid form and oil from the compressor or intake air, and each requires a different treatment.
Particles come from intake air, pipe corrosion and wear. Particulate filters remove them.
Water enters as humidity in the intake air and condenses as air cools after compression. Separators, drains and dryers address it.
Oil comes from lubricated compressors and from intake air as hydrocarbon vapor. Coalescing filters and activated carbon filters remove it.
Understanding the source of each contaminant helps you place filters, dryers and drains correctly. Wear eye protection when servicing filters and drains. A good order is separator, particulate filter, dryer and then coalescing filter where needed.
Tools used for this job
What is an activated carbon filter for compressed air?
Short answer: An activated carbon filter removes oil vapor and odors that coalescing filters cannot catch, and is used after a coalescing filter for paint, food and breathing air applications.
Coalescing filters remove liquid oil and aerosols, but some oil remains as vapor. Carbon filters adsorb this vapor.
They must be protected by upstream coalescing filters to avoid saturation. Elements have limited life and need regular replacement.
Carbon filters are commonly used in paint lines to reduce silicone and oil contamination that can cause fisheyes.
Follow the maker's replacement schedule and wear eye protection when servicing. Breathing air systems require additional protection beyond carbon filtration. A pressure drop indicator or the element's service hours help decide when to replace it.
Tools used for this job
Why do paint shops worry about silicone in compressed air?
Short answer: Silicone contamination from lubricants, sprays or tools can travel through air lines and cause fisheyes and adhesion problems in paint, so paint shops control silicone sources and filter air carefully.
Even tiny amounts of silicone cause paint to pull away from spots, leaving craters called fisheyes. Silicone sprays used elsewhere in the shop can enter the air.
Using oil-free or carefully filtered air for paint and keeping silicone products out of the shop help.
Some air tool oils and hose lubricants contain silicone, so check product labels.
Clean surfaces thoroughly before painting. Wear eye protection and a respirator during painting. An activated carbon stage after the coalescing filter adds protection on paint lines.
Tools used for this job
Does an oil-free compressor deliver completely oil-free air?
Short answer: No. An oil-free compressor does not add lubricating oil to the air, but it still draws in oil vapor, hydrocarbons and particles from the surrounding atmosphere, so painting and sensitive uses still need proper filtration downstream.
Oil-free compressors use coated or self-lubricating parts so there is no oil in the compression chamber. That removes the largest source of oil carryover, which is why they are popular for paint, food and medical uses.
The intake air itself can carry oil mist from nearby tools, exhaust fumes, solvent vapors and dust. The compressor concentrates whatever it draws in, so air quality also depends on where the intake is located.
Old pipes that once carried oily air can keep contaminating the supply until cleaned or replaced.
For paint work, use a coalescing filter and, where needed, an activated carbon filter at the point of use, and wear an appropriate respirator, since filtered shop air is not safe breathing air without a proper breathing-air system.
Tools used for this job
How often should desiccant in an air dryer be replaced?
Short answer: Desiccant in regenerative dryers often lasts several years, while point-of-use disposable desiccant cartridges need replacing when the color indicator changes or moisture appears downstream, and oil contamination ruins desiccant fast, so prefilters matter.
Regenerative desiccant dryers dry the bed with purge air. The beads slowly break down over time, and their life depends on inlet temperature, oil carryover and cycling.
Small desiccant filters at spray guns hold a limited charge. Many use color-changing beads to show when they are saturated.
Oil coats desiccant and stops it from absorbing water, so install a coalescing filter upstream.
Follow the maker's service intervals, depressurize before opening housings and wear eye protection. Keep a record of replacement dates so you can spot when cartridges start saturating faster, which often signals a failing upstream separator or drain.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.