Does tire sealant damage TPMS sensors?
Short answer: It can. Liquid sealant can coat or block the sensor's pressure port, so inspect and clean the sensor carefully, and replace it if the port is clogged or the sensor gives bad readings.
Emergency tire sealants work by coating the inside of the tire and plugging a puncture. Inside the wheel, that same material can collect on the TPMS sensor. If the small opening that lets the sensor read air pressure gets blocked, the sensor may read wrong or stop reporting changes.
When you dismount a tire that has sealant in it, wear gloves and eye protection, remove as much sealant as you can, and inspect the sensor closely. Follow the sensor maker's guidance on cleaning. Many technicians simply replace a sensor that has been heavily coated, since a sensor that reads a little wrong causes more trouble than it saves.
Check the sealant product's own instructions as well, because some products state how their sealant should be cleaned from wheels and sensors. Tell the customer before the job that sealant use may mean a new sensor, so the added cost is not a surprise.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.