Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Air/Hydraulic Jacks and Pumps / How does an air/hydraulic bottle jack work?

How does an air/hydraulic bottle jack work?

Short answer: An air/hydraulic jack uses a small air motor or air piston to drive a hydraulic pump, so shop air raises the load instead of hand pumping, while the hydraulic ram still does the lifting and holds the load until released.

In a standard bottle jack, each stroke of the handle pushes a small pump piston that forces oil under the main ram. An air/hydraulic jack keeps the same hydraulic ram and valves but adds an air-driven pump. When you open the air valve, the pump cycles rapidly and the ram rises without manual pumping. Many models still accept a handle for manual operation.

These jacks are popular for trucks, equipment and fleet work where loads are heavy and lifting is frequent. They need adequate air pressure, usually stated by the maker, and clean, dry air to protect the air motor.

A jack is only for lifting. Once the load is raised, support it on jack stands rated for the weight before working underneath. Use the jack on a hard, level surface, center it under a proper lift point and never exceed its rated capacity. Lower the load slowly and keep hands and feet clear.

Last reviewed 2026-11-20 · Air/Hydraulic Jacks and Pumps

Tools used for this job

OTC BT12P 12-Ton Air Assisted Bottle JackOTC BT20P 20-Ton Air Assisted Bottle JackAFF 5621SD 20 Ton Low Profile SD Air/Hydraulic Bottle JackAFF 5630SD 30 Ton SD Air/Hydraulic Bottle Jack

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.