How much floor space do I need for static ADAS calibrations?
Short answer: It depends on the vehicle and procedure, but many forward camera and radar calibrations need a clear, level area extending several meters in front of the vehicle plus room around the sides; check the maker's dimensions before committing a bay.
Static calibration requires placing targets at specific distances from the vehicle, and those distances vary widely by maker. Some forward camera targets sit close to the bumper, while some radar and side sensor procedures need much more room in front of or beside the vehicle. Surround view mats need clear floor around the entire vehicle.
Before dedicating a bay, look up the procedures for the vehicles you see most often and measure the longest requirement. Include working space for the frame, cabinet and technician, not only the target distance. Check whether the floor is level within the tolerance specified, since slope can cause failed or inaccurate calibrations.
Lighting and clutter also matter, so a calibration area should be clear of reflective tool boxes, parked vehicles and moving traffic. Mark target positions on the floor once measured to save setup time, and keep heavy frames on locking casters to prevent trip and tipping hazards.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.