How often should I oil my air tools?
Short answer: Most air tool makers recommend a few drops of air tool oil in the inlet before each use or daily, plus more after heavy use or if the tool was exposed to water, unless the tool is designed to run oil-free.
Vane-type air motors rely on a thin oil film to seal the vanes against the cylinder and to protect against rust. Without oil, vanes wear, the motor loses power and moisture in the air causes corrosion.
A common practice is to put a few drops of air tool oil into the air inlet at the start of each day, connect the tool and run it briefly to distribute the oil. Tools used heavily may need oil more often. Check the manual, because some makers specify an exact amount, and some tools have lubrication-free motors that should not be oiled.
Use oil made for air tools rather than motor oil, penetrating sprays or ATF. Run the tool briefly with the exhaust pointed away from you and wipe off excess, since oil mist can make floors and handles slippery. Wear eye protection, as freshly oiled tools can spit oil from the exhaust.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.