Should I oil an air tool before or after use?
Short answer: Many makers recommend oiling before each use, and adding oil after use helps protect against rust during storage, especially in humid shops.
Oiling before use makes sure the vanes are lubricated the moment the motor starts, which reduces wear during the first minutes of running. Oiling after use leaves a protective film inside the motor that resists rust from moisture left behind when the tool sits overnight or over a weekend.
A practical routine is a few drops of air tool oil in the inlet at the start of the day and a few more before the tool goes into storage for an extended period. Tools used in humid shops or exposed to wet air benefit most from the after-use dose. Follow the maker's manual, since some specify an amount and a few lubrication-free tools should not be oiled at all.
Run the tool briefly after oiling to spread the oil, pointing the exhaust into a rag. Wipe off excess so handles stay grippy, and wear eye protection when running freshly oiled tools.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.