Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Heavy-Duty and Fleet Air Tools / What air tools does a fleet shop use for truck wheel service?

What air tools does a fleet shop use for truck wheel service?

Short answer: Fleet shops typically use 1-inch or 3/4-inch drive impact wrenches with extended anvils for lug nuts, along with torque wrenches or torque multipliers for final tightening, high-flow air supply and wheel dollies or lifts for handling.

Heavy truck wheel nuts are large and tightened to high torque, so technicians often use 1-inch drive impacts for removal. Extended anvils, commonly about 6 inches, reach recessed nuts on deep wheels and dual setups.

These tools need a strong air supply. Makers usually recommend larger hose and fittings, often 1/2-inch hose and high-flow couplers, to deliver enough air.

Final tightening should follow the wheel or vehicle maker's torque specifications using a calibrated torque wrench or multiplier, and many fleets require retorque checks after a set distance.

Heavy tools and wheels create strain and crush risks. Use wheel handling equipment, keep feet clear, wear eye protection and gloves and follow your fleet's wheel service procedures.

Last reviewed 2026-11-20 · Heavy-Duty and Fleet Air Tools

Tools used for this job

Ingersoll Rand 285B-6 1" Impact with 6" Extended AnvilAIRCAT 1992-A 1" Dr 6" Anvil Impact WrenchChicago Pneumatic 8941077826-CP7782-6 1" Straight Impact Wrench with 6" Extended Anvil

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.