What does a 50:1 ratio mean on an air-operated grease pump?
Short answer: The ratio means the pump multiplies inlet air pressure about 50 times at the grease outlet, so 100 psi of shop air can theoretically produce around 5,000 psi of grease pressure before losses.
Air-operated grease and fluid pumps use a large air piston driving a much smaller material piston. The ratio of their areas sets the pressure multiplication. A 50:1 pump fed with 100 psi air can build roughly 5,000 psi at the outlet when flow stops, while a 3:1 oil pump would produce about 300 psi.
High ratios suit thick grease and long hose runs. Low ratios suit thin fluids such as motor oil and gear oil, where volume matters more than pressure.
Because outlet pressure follows inlet pressure, many systems use a regulator on the air supply to limit grease pressure. Check the pump, hose, control valve and coupler ratings so every part is rated above the maximum outlet pressure.
High-pressure grease can inject through skin, so never point a grease valve at anyone or hold the coupler with a bare hand while dispensing. Wear eye protection and gloves.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.