What is a nitrogen tire inflation generator?
Short answer: A nitrogen generator uses shop compressed air and a membrane or pressure-swing system to separate nitrogen from oxygen, then stores higher-purity nitrogen in a tank for filling tires through inflation hoses or cabinets.
Shop air is already about 78 percent nitrogen. A generator raises the purity, often into the 90s percent, by removing much of the oxygen and moisture. The result is drier gas that some shops offer as a service for passenger and fleet tires.
The generator needs clean, dry inlet air, so it depends on good filtration and a properly sized compressor. Purity and flow depend on the model and settings, so check the maker's specifications.
Many systems include purge-and-fill programs that deflate and refill tires several times to raise nitrogen concentration inside the tire.
Follow the maker's service schedule for filters and membranes. Wear eye protection when inflating, and never exceed the tire's maximum pressure or the vehicle's recommended pressure.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.