What is an FRL unit for compressed air?
Short answer: An FRL is a filter, regulator and lubricator assembled in series; it removes water and dirt, sets the pressure your tools need and adds a fine oil mist for tools that require lubrication.
An FRL sits at an air drop or near a tool station. The filter comes first and removes liquid water, rust and dirt. The regulator follows and reduces line pressure to a steady setting, usually about 90 PSI for typical air tools. The lubricator comes last and meters a small amount of oil into the air stream for tools that need it.
The order matters. Filtering first protects the regulator, and lubricating last ensures oil reaches the tools rather than being filtered out.
Not every drop needs a lubricator. Paint guns, blow guns, inflators and air lines feeding paint or sandblasting must not receive oil. Many shops oil tools manually and skip lubricators entirely. Size the FRL for your tools' flow so it does not restrict them, use bowl guards and drain the filter bowl regularly. Depressurize before servicing any FRL component.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.