Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Air Tool Specs and Ratings Explained / What is the difference between working torque, maximum torque and nut-busting torque?

What is the difference between working torque, maximum torque and nut-busting torque?

Short answer: Working torque is the range a tool delivers in normal tightening, maximum torque is the highest tightening torque under test conditions, and nut-busting or breakaway torque is the highest loosening torque, usually the biggest number on the box.

Impact wrench makers often list several torque values. Working torque describes the tool's practical tightening range for repeated work. Maximum or reverse torque is the highest output measured in a lab under specific conditions. Nut-busting or breakaway torque describes how much torque it can apply when breaking a fastener loose, and it is usually much higher because the tool runs in reverse at full power and the fastener's release adds a dynamic effect.

Different brands may measure these differently, so comparing one brand's nut-busting figure to another's maximum torque can mislead. Look for matching test standards or independent tests.

Remember that no impact wrench torque rating is a substitute for a torque wrench when a fastener has a specified torque. Use impact-rated sockets and wear eye and hearing protection.

Last reviewed 2026-11-20 · Air Tool Specs and Ratings Explained

Tools used for this job

Ingersoll Rand 2236QTIMAX 1/2" DXS2 Quiet Impact WrenchAIRCAT 1125 1/2" Composite HD Impact WrenchAstro Pneumatic 1828 ONYX 3/8" Nano Impact Wrench - 450ft/lb

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.