Air Tool Specs and Ratings Explained
What free speed, BPM, working torque, air inlet size, sound and vibration ratings, and other numbers on air tool packaging actually mean.
What is a vane motor in an air tool?
Short answer: A vane motor is the most common air tool motor, using a slotted rotor mounted off-center in a cylinder with sliding vanes that seal against the wall, so compressed air pushes the vanes and spins the rotor.
As air enters the cylinder, it pushes on the exposed vanes and expands as the chambers grow larger, then exits through the exhaust ports.
Vane motors are compact, light and powerful for their size, which is why they are used in impact wrenches, ratchets, grinders and drills.
They need lubrication to keep vanes sliding freely and sealing well, and they slow down when vanes wear or stick.
Keep the motor oiled as the maker recommends, use dry air and wear eye protection while servicing tools.
Tools used for this job
What is the difference between pistol-grip and inline air tools?
Short answer: Pistol-grip air tools put the motor at an angle to the handle for pushing and drilling straight into work, while inline tools put the motor and handle in one straight line for reaching into narrow spaces and controlling torque reaction with the whole hand.
Pistol grips feel natural for drills, impact wrenches and screwdrivers used straight ahead.
Inline tools, such as straight die grinders, inline screwdrivers and stick ratchets, slide into tight gaps.
Torque reaction is handled differently, as inline tools twist the wrist while pistol grips push back into the hand.
Choose the style that fits the job and wear eye protection with both. Angle-head tools are a third style, putting the output at 90 degrees for access behind components. Consider weight distribution as well, since a top-heavy pistol tool held overhead tires the wrist faster than a balanced inline tool. Many technicians keep both styles of die grinder and screwdriver for different jobs.
What does the muffler on an air tool do?
Short answer: An air tool muffler slows and spreads out the exhaust air as it leaves the motor, lowering noise and directing the blast away from the user, and a clogged or missing muffler can make the tool either weaker or much louder.
Air leaves an air motor at high speed, which creates a sharp hissing and popping sound. Mufflers use felt, sintered metal, foam or baffles to slow that air down before it escapes.
Many tools route exhaust through the handle, which keeps it away from the face and the work. Others use side or rear exhaust with a separate muffler element.
Mufflers collect oil and debris over time. A clogged muffler restricts airflow, so the tool loses power, while removing it makes the tool much louder.
Clean or replace mufflers as the maker recommends, never point exhaust at people and wear hearing protection, since even muffled air tools can be loud enough to damage hearing.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.