Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Hand Tools / Screwdrivers and Bits / Why do some screws on Japanese vehicles strip with a Phillips screwdriver?

Why do some screws on Japanese vehicles strip with a Phillips screwdriver?

Short answer: Many Japanese-made vehicles and parts use JIS cross-head screws, which look like Phillips but have a different recess shape; a JIS driver fits better and is less likely to cam out.

Phillips screws were designed so the driver would slip out, or cam out, when tightened to a certain point. Japanese Industrial Standard cross-head screws look nearly the same but use a recess designed to reduce cam-out. A Phillips driver does not seat fully in a JIS recess, so it tends to slip and damage the head, especially on screws that are tight or corroded.

JIS screws are often marked with a small dot or dimple on the head, though not always. If you work on many Japanese vehicles, motorcycles or small engines, a set of JIS screwdrivers or bits is worth having.

Whatever the head type, press firmly into the screw, keep the driver straight, and use the correct size. Do not keep turning a driver that has started to slip. On a stubborn screw, an impact driver designed for hand use can help free it without stripping the head.

Last reviewed 2026-11-16 · Screwdrivers and Bits

Tools used for this job

Vessel 980MIXEVA 8 Piece MEGADORA IMPACTA Assorted Screwdriver SetGEARWRENCH 80052H 5 Piece Phillips Dual Material Screwdriver Set

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.