Screwdrivers and Bits
Choosing and using screwdrivers, bit types and screw head styles found on vehicles.
Why do some screws on Japanese vehicles strip with a Phillips screwdriver?
Many Japanese-made vehicles and parts use JIS cross-head screws, which look like Phillips but have a different recess shape; a JIS driver fits better and is less likely to cam out.
Read the full answer →What is a tang-through screwdriver?
Short answer: It is a screwdriver whose steel shaft runs all the way through the handle to a metal cap, so it can take light striking with a hammer without breaking the handle.
In a standard screwdriver, the shaft is anchored partway into the handle. Hitting the handle can crack it or loosen the shaft. A tang-through, or through-tang, screwdriver extends the steel shaft through the handle to a cap on the end. That gives a solid path for a hammer blow.
Technicians use these to shock a seized screw loose, to tap a scraper or chisel-like blade, or to drive a blade into a stubborn slot. They are tougher than standard screwdrivers but are not a substitute for a real chisel or punch.
Wear safety glasses when striking any tool, and do not use a screwdriver as a pry bar. A bent or broken shaft can launch pieces or slip and cause an injury.
Tools used for this job
When do I need a torque screwdriver?
Short answer: Use a torque screwdriver for small fasteners with low torque specifications, such as sensor screws, electrical terminals and some trim and module fasteners, where overtightening can strip threads or crack housings.
Many small fasteners on modern vehicles go into plastic, aluminum or delicate housings. Their torque specifications are often in inch-pounds and low enough that a ratchet by feel easily overtightens them. Stripped threads in a plastic housing or a cracked sensor flange can turn a simple job into a larger repair.
A torque screwdriver accepts standard bits and slips or signals when it reaches the set value. It is useful for electrical terminal screws, module mounting screws, small sensor fasteners and some TPMS components.
Use the specification from service information, choose a bit that fits the screw head snugly, and hold the driver straight. Have the tool checked for accuracy periodically, like any torque tool.
Tools used for this job
How does a hand impact driver free stuck screws?
Short answer: When struck with a hammer, a hand impact driver converts the blow into a sharp turning force while pushing the bit into the screw, which helps free seized screws without camming out.
Seized screws, such as brake rotor retaining screws and some older body fasteners, often strip when turned with a screwdriver. A hand impact driver solves two problems at once. The hammer blow drives the bit firmly into the screw head, and the internal mechanism converts part of that blow into a twisting motion.
Set the driver's direction, fit the correct bit snugly, hold the driver straight, and strike firmly with a hammer. Penetrating oil and heat, where safe, improve the odds.
Wear safety glasses, since bits can break and debris can fly. Use impact-rated bits, keep fingers clear of the striking area, and never use a hand impact driver near fuel lines or brake lines where a slip could cause damage.
Tools used for this job
What screwdriver bit types should a technician keep on hand?
Short answer: A practical bit kit includes Phillips, JIS, slotted, Torx, tamper-resistant Torx, hex in metric and SAE, and triple square, plus impact-rated versions for power tools.
Vehicles use many screw head types. Phillips and slotted appear on older fasteners and trim. JIS cross-head screws are common on Japanese vehicles. Torx is everywhere on modern cars, from interior trim to brake components. Hex fasteners come in both metric and SAE sizes, and triple square bits are common on some European vehicles.
Tamper-resistant Torx and hex bits have a hole in the center for screws with a pin, which are used on some modules and lights.
Keep a compact set of quality bits with a magnetic holder, and a separate set of impact-rated bits for power tools. Replace worn bits promptly: a rounded bit damages screws and causes slips that can injure hands.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.