Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

Do I need an air dryer for my shop?

Short answer: If water shows up in tools, hoses or paint, or your air lines run through cold areas, a dryer is worthwhile; refinishing and paint work almost always need one.

Compressed air carries water vapor that condenses as it cools. Tank drains and filters remove liquid water, but vapor that passes through can condense later in hoses and tools, causing rust, washed-out lubrication and paint defects.

Refrigerated dryers cool the air to condense water out, then reheat it, which is effective for general shop air. Desiccant dryers use absorbent material to reach much lower dew points and are common for paint booths and point-of-use paint stations. Membrane dryers are another option at point of use.

Size a dryer for your compressor's CFM and the temperatures where it will operate. Place it after the tank and a pre-filter. Drain separators and change desiccant or filters on schedule. Disconnect power and depressurize before servicing any dryer.

Last reviewed 2026-11-20 · Filters, Regulators, Lubricators and Dryers

Tools used for this job

DeVilbiss 130546 DAD-PRO™Desiccant Air Drying SystemDeVilbiss 130500 Desiccant Air Dryer System CT-30

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.