Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Spray Guns and Paint Equipment / How do I spray single-stage paint with an HVLP gun?

How do I spray single-stage paint with an HVLP gun?

Short answer: Mix the paint exactly to the maker's data sheet, use the recommended tip size and inlet pressure, spray a medium first coat followed by full wet coats with proper flash time between them and keep gun distance, speed and overlap consistent.

Single-stage paint combines color and gloss in one product, so the final coat must flow out smoothly without a clear layer to fix texture. That makes setup and technique especially important.

Most single-stage urethanes call for a tip in the 1.3 to 1.5 mm range and a specific inlet pressure for HVLP guns, but follow the paint maker's technical data sheet for your product. Strain the paint, and test the pattern on paper before spraying the panel.

Hold the gun perpendicular to the surface at the recommended distance, trigger before each pass and overlap each pass by about half to three quarters. Allow the specified flash time so solvent can escape before the next coat.

Metallic single-stage colors can mottle, so a final drop or control coat may be recommended. Spray in a ventilated booth and wear a suitable respirator, gloves, eye protection and a paint suit, since isocyanate-containing paints require strict respiratory protection.

Last reviewed 2026-11-20 · Spray Guns and Paint Equipment

Tools used for this job

AIRCAT 6900 1.3mm HVLP Gravity Feed Spray GunAstro Pneumatic EUROHV103 1.3mm EuroPro HVLP Spray Gun with Plastic Cup

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.