Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Compressor Electrical and Controls / What does the capacitor on an air compressor motor do?

What does the capacitor on an air compressor motor do?

Short answer: Single-phase compressor motors often use a start capacitor to give the motor extra torque at startup, and some also use a run capacitor for efficiency, so a failed capacitor can leave the motor humming without starting.

Starting a compressor is hard work, especially if any pressure remains in the pump head. The start capacitor shifts the phase of current in a start winding, giving the motor the twist it needs to get moving. A centrifugal switch or relay then drops the start circuit out once the motor reaches speed.

Signs of a failed start capacitor include a motor that hums, trips the breaker or starts only with a spin by hand. A bulging, leaking or burnt capacitor is an obvious sign, though capacitors can also fail without visible damage.

Capacitors can hold a dangerous charge even after power is removed. Only a qualified person should test or replace them, using proper discharge procedures and a replacement with the correct ratings.

Also check that the unloader is releasing head pressure at shutdown, since starting against pressure strains the capacitor and motor. Lock out power before any inspection and wear eye protection.

Last reviewed 2026-11-20 · Compressor Electrical and Controls

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.