What is the difference between HVLP, LVLP and conventional spray guns?
Short answer: Conventional guns atomize with high air cap pressure and waste more paint, HVLP guns use high air volume at low cap pressure for better transfer efficiency, and LVLP guns aim for good atomization with less air volume, suiting smaller compressors.
Conventional spray guns use higher pressure at the air cap to break paint into fine droplets. They atomize well but create more overspray and bounce-back, which wastes material and adds to emissions.
HVLP, or high volume low pressure, guns limit air cap pressure, commonly to about 10 PSI, while using a larger volume of air. Lower velocity reduces overspray, so more paint lands on the panel. Many air quality regulations require HVLP or compliant high transfer efficiency guns in refinishing. HVLP guns typically need substantial compressor capacity.
LVLP guns are designed to atomize well with lower air volume and moderate pressure, making them popular with smaller compressors. Compliant or high-efficiency designs from various makers fall between these categories. Check your local air quality rules, the gun's specified inlet pressure and air consumption, and always spray with proper ventilation and a respirator rated for the coatings.
Tools used for this job
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.