Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics
Home / Answers / Air Tools & Compressed Air / Spray Guns and Paint Equipment / What spray gun tip size should I use for automotive paint?

What spray gun tip size should I use for automotive paint?

Short answer: Many painters use about 1.2 to 1.4 mm for basecoat and clearcoat, 1.4 to 1.6 mm for single-stage and sealers, and 1.7 to 2.2 mm or larger for primer surfacers, but always check the paint's technical data sheet.

The fluid tip size, also called nozzle or needle size, controls how much paint flows through the gun. Thinner materials atomize better through smaller tips, while thicker materials need larger tips to flow properly.

Typical starting points are around 1.3 mm for basecoat and clear, slightly larger for single-stage enamels and sealers, and roughly 1.7 to 2.0 mm or more for high-build primers. Polyester sprayable fillers may need even larger tips. These are general ranges only.

Paint makers publish technical data sheets that specify recommended tip sizes, inlet pressure and mixing ratios for each product and gun type. Follow those first. Use the matching needle, nozzle and air cap set from the gun maker. Always spray in a ventilated booth with a respirator rated for the coatings, since many contain isocyanates.

Last reviewed 2026-11-20 · Spray Guns and Paint Equipment

Tools used for this job

Anest Iwata 9275 1.6 Air Gunsa Impact Spray Gun AZ3 HVLP-SAnest Iwata 9286 1.4 Needle and Nozzle Set for AZ3 HVLP-S ImpactAstro Pneumatic EUROHE103 1.3mm EuroPro High Transfer Spray Gun

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.