Pneumatic Nailers, Staplers and Riveters
Air-powered fastening tools, how they work and how to use them safely.
How should I oil a pneumatic nail gun?
Short answer: Most oil-lubricated nail guns need a few drops of pneumatic tool oil in the air inlet at the start of each day, while oil-free nailers should not be oiled unless the maker says so, and too much oil can stain wood.
Oil keeps O-rings supple and the piston sealing well. Add a few drops before work and fire a few nails into scrap to distribute it.
Use only non-detergent pneumatic oil, not motor oil or penetrating sprays, which can swell seals.
Oil-free nailers have permanently lubricated seals. Adding oil can wash out factory lubricant.
Disconnect air before oiling, and wear eye protection when test-firing. If you use an inline lubricator, keep it off lines that also feed paint guns or finish work. Wipe excess oil from the nose after oiling so it does not mark finished trim, and run a test fastener into scrap before working on visible surfaces.
Tools used for this job
What air pressure should I run a nail gun at?
Short answer: Most nail guns run between about 70 and 120 psi depending on the tool and fastener, so check the maker's range, start low, test on scrap and raise pressure only until fasteners sink correctly.
Too much pressure overdrives nails, damages wood and wears the tool faster. Too little leaves heads proud.
Use the depth adjustment for fine control and pressure for larger changes.
Never exceed the maximum pressure stamped on the tool.
Wear eye and hearing protection while testing. Pressure needs vary with the wood. Hardwoods and engineered lumber often need more than softwoods, and longer nails need more than short ones. Long hoses and multiple tools on one compressor can drop pressure at the gun, so set the regulator while the tool is in use if possible and check that the compressor keeps up during fast nailing.
General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.