Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0014 mean?

Short answer: P0014 means the exhaust camshaft on bank 1 is more advanced than the engine computer commanded, or the system is not performing as expected; oil level and condition, the oil control solenoid and timing components are common causes.

P0014 is a generic code for exhaust camshaft position timing over-advanced or system performance on bank 1. Variable valve timing systems use engine oil pressure, controlled by a solenoid, to move the camshaft.

Start with the basics: correct oil level, the right oil viscosity, and clean oil. Sludge or low oil can make the phaser respond poorly. Check for related codes and service bulletins.

With a scan tool, compare desired and actual cam position, and use bidirectional controls if available to command the solenoid. Inspect the solenoid screen if equipped. A stretched timing chain or worn phaser can also cause this code. Don't run the engine with low oil while testing, since it risks engine damage.

Last reviewed 2026-11-16 · Engine Sensor and Timing Codes

Tools used for this job

Autel MS906MAX OBDII Bi-Directional Diagnostic Scanner

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.