Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0327 mean?

Short answer: P0327 means the knock sensor 1 circuit on bank 1, or the single sensor, shows a low signal; common causes are damaged wiring, a poor connection or a failed sensor.

P0327 is a generic code for knock sensor 1 circuit low on bank 1 or a single-sensor engine. Knock sensors detect vibrations from detonation so the engine computer can retard timing.

Knock sensors are often mounted under the intake manifold, where harness damage and oil or coolant contamination are common. Check the connector and wiring for damage. Measure the circuit and compare with service information.

A knock sensor must be torqued to specification, since overtightening or undertightening changes its sensitivity. Use a torque wrench when installing one. Check for related codes and service bulletins. Let the engine cool before removing intake components.

Last reviewed 2026-11-16 · Engine Sensor and Timing Codes

Tools used for this job

GEARWRENCH 85086M 3/8" Drive Flex Head Micrometer Torque Wrench 5-75Autel MS906MAX OBDII Bi-Directional Diagnostic Scanner

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.