Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0125 mean?

Short answer: P0125 means the engine took too long to reach the temperature needed for closed loop fuel control, most often from a thermostat stuck open, low coolant or a coolant temperature sensor problem.

P0125 is a generic code for insufficient coolant temperature for closed loop fuel control. The engine computer expects the engine to warm up within a set time and switch to closed loop. If it does not, this code sets.

A thermostat stuck open is the most common cause, especially in cold weather. Low coolant can also cause it. Watch coolant temperature on the scan tool during warm-up and compare it with expectations.

A coolant temperature sensor that reads low can set the code even if the engine warms up normally. Compare the sensor reading with a thermometer or thermal camera. Never open the cooling system on a hot engine, since hot coolant under pressure can cause burns.

Last reviewed 2026-11-16 · Engine Sensor and Timing Codes

Tools used for this job

Autel MS906MAX OBDII Bi-Directional Diagnostic ScannerTopdon TS006

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.