Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0017 mean?

Short answer: P0017 means the engine computer sees a mismatch between crankshaft and exhaust camshaft position on bank 1, which can come from timing chain stretch, a jumped timing chain, phaser issues or sensor problems.

P0017 is a generic code for crankshaft position to camshaft position correlation, bank 1 sensor B. Sensor B is usually the exhaust camshaft. The computer compares the two positions and sets this code when they are out of expected range.

Common causes include a stretched timing chain, worn guides or tensioners, a jumped tooth, or a faulty variable valve timing phaser or solenoid. Sensor or tone wheel problems can also cause it.

Check oil level and condition. Use a scan tool to view cam and crank correlation values if available, and compare waveforms on a scope. Check service bulletins. Don't keep running an engine with a suspected jumped chain, since it risks valve damage.

Last reviewed 2026-11-16 · Engine Sensor and Timing Codes

Tools used for this job

Autel 906MAXMP608 MaxiSYS MS906 MAX & MaxiScope MP608 Oscilloscope BundleAutel MP608

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.