Store relaunching soon · pro diagnostics & tools for independent shopsjoseph@directtoolsource.com
Direct Tool SourcePro Diagnostics

What does code P0107 mean?

Short answer: P0107 means the manifold absolute pressure or barometric pressure sensor circuit voltage is lower than expected, often from wiring, connector or reference voltage problems, or a failed sensor.

P0107 is a generic code for MAP or barometric pressure circuit low input. The engine computer sees a voltage below its normal range on the sensor signal circuit.

Check the connector for corrosion or damage, and the harness for chafing. With the key on, check for the reference voltage, ground and signal at the sensor. A shorted signal wire or a missing reference can cause a low reading.

If other sensors sharing the same reference also have low codes, look for a shorted sensor on that reference circuit. Compare the MAP reading with barometric pressure at key on, engine off. Back probe carefully and don't pierce wire insulation, which allows corrosion.

Last reviewed 2026-11-16 · Engine Sensor and Timing Codes

Tools used for this job

Lisle 64900 17 Piece Meter Back Probe KitElectronic Specialties TMX-589 True RMS Digital Multimeter CATII 1000 Volt

General guidance only. Follow the vehicle and tool manufacturer's procedures, and confirm vehicle coverage on the tool maker's list before buying.